--------------------------------------- | Home | -----------------------------------------

M Lens Turret Orolf

Sponsored



M Lens Turret Orolf

  • Introduced in 1960, and on the market only for one year.
  • Weight : 750 g.
  • Approx. numbers manufactured : 250

Orolf is 3 lens tarret for the Leica M2/M3 enabling faster lens exchange, and one of the rarest item among a large variety of Leitz' accessories.
It is large, and may not be comfortable to use with. We can easily imagine that the sale's profit by it was much less than the gross cost needed for developing it since it was on the market only for one year, and thus became one of the most unprofitable product in Leitz' history. But on the other hand, it is the most desirable and satisfactory stuff if you have wanted it.
Although it was made for the Leica Ms, the lenses attached to it were the screw-in mount type.

Fig. Elmar 50mm f/3.5, Elmar 90mm f/4 and Zummaron 35mm f/3.5 on Orolf, attached to M2.

Features

Orolf with handle.
shapes like a clover leaf.

The lens attachable is the Leica's screw-in mount lens. Accepted lens is indicated in lens length on each tarret. The tarret in the figure above is for "M2 50 M3 50-35".

Remove the base plate, and repalce Orolf.

The replaceable base plate is provided on Orolf.

Turn the lever on the base plate to "close-zu". (The lever is set at "close-zu" in the figure right.)

The lens for Orolf, Elmar 50mm f/3.5. Each lens is available for the Screw mount Leicas, too.

The focusing lever's shape differs from the normal one.
Left : Normal type, Right : Orolf type.

The lens board rotates through this knob.

"Leitz WETZLAR" engraved beside the strap hole.



Sponsored


Pin It

Terima kasih Anda telah membaca artikel M Lens Turret Orolf, mengutip atau mengcopy artikel ini mohon untuk mencantumkan sumbernya.

Copyright 2011. All rights reserved.